DRBL ä¼éµé¾

Diskless Remote Boot in Linux

DRBL live 2.5.1-16

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2017/Mar/28).
  • Linux kernel was updated to 4.9.13-1.
  • Package drbl was updated to 2.23.28-drbl1, and clonezilla was updated to 3.25.24-drbl1.

-- Steven Shiau <steven at nchc org tw> Tue, 28 Mar 2017 22:25:00 +0800

DRBL live 2.5.1-15

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2017/Feb/24).
  • Linux kernel was updated to 4.9.10-1.
  • Language file sk_SK was updated. Thanks to Ondrej Dzivy Balucha.
  • Language file es_ES was revised. Thanks to Pablo Hinojosa Nava and Juan Ramón Martínez.
  • Package drbl was updated to 2.23.24-drbl1, and clonezilla was updated to 3.25.14-drbl1.

-- Steven Shiau <steven at nchc org tw> Sat, 25 Feb 2017 20:06:00 +0800

DRBL live 2.5.1-7

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2017/Jan/30).
  • Linux kernel was updated to 4.9.6-3.
  • Package drbl was updated to 2.23.16-drbl1, and clonezilla was updated to 3.25.9-drbl1.
  • Add a mechanism to use the existing DHCP service on the LAN when there is only a network interface on the machine. Therefore the conflicting DHCP service issue has been gone from this release.

-- Steven Shiau <steven at nchc org tw> Mon, 30 Jan 2017 20:52:00 +0800

DRBL live 2.4.7-7

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2016/Oct/28).
  • Linux kernel was updated to 4.7.8-1.
  • Package drbl was updated to 2.22.4-drbl1, and clonezilla was updated to 3.24.2-drbl1.

-- Steven Shiau <steven at nchc org tw> Sun, 30 Oct 2016 20:22:00 +0800

DRBL live 2.4.7-3

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2016/Oct/14).
  • Linux kernel was updated to 4.7.6-1.
  • Bug fixed: screen saver lock was not disabled.
  • Package drbl was updated to 2.21.9-drbl1, and clonezilla was updated to 3.23.23-drbl1.

-- Steven Shiau <steven at nchc org tw> Fri, 14 Oct 2016 20:57:00 +0800

DRBL live 2.4.6-18

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2016/Sep/22).
  • Linux kernel was updated to 4.7.2-1+s1.
  • Package drbl was updated to 2.21.5-drbl1, and clonezilla was updated to 3.23.5-drbl1.

-- Steven Shiau <steven at nchc org tw> Thu, 22 Sep 2016 20:57:00 +0800

DRBL live 2.4.6-12

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2016/Aug/16).
  • Linux kernel was updated to 4.6.4-1.
  • Package drbl was updated to 2.20.36-drbl1, and clonezilla was updated to 3.22.21-drbl1.

-- Steven Shiau <steven at nchc org tw> Wed, 17 Aug 2016 11:36:00 +0800

DRBL live 2.4.6-7

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2016/Jul/28).
  • Linux kernel was updated to 4.6.2-2.
  • Package drbl was updated to 2.20.28-drbl1, and clonezilla was updated to 3.21.35-drbl1.

-- Steven Shiau <steven at nchc org tw> Tue, 28 Jun 2016 20:32:00 +0800

DRBL live 2.4.6-5

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2016/Jul/23).
  • Linux kernel was updated to 4.6.2-1.
  • Partclone was updated to 0.2.89-drbl1. A btrfs issue was fixed.
  • Package drbl was updated to 2.20.27-drbl1, and clonezilla was updated to 3.21.28-drbl1.

-- Steven Shiau <steven at nchc org tw> Fri, 24 Jun 2016 10:03:00 +0800

DRBL live 2.4.6-1

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2016/Jul/16).
  • Linux kernel was updated to 4.6.1-1.
  • Package live-boot was patched to support using multiple modules for toram option.
  • Use toram=live,syslinux in drbl live to copy the "live" and "syslinux" directories only. Thanks to hirokofan (hirokofan at mail cyc edu tw) for this suggestion.

-- Steven Shiau <steven at nchc org tw> Thu, 16 Jun 2016 20:22:00 +0800

DRBL live 2.4.5-39

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2016/Jul/07).
  • Linux kernel was updated to 4.5.5-1.
  • Bug fixed: when only one NIC on the server, the drbl client failed to lease IP address. https://sourceforge.net/p/drbl/discussion/DRBL_live/thread/ 562175bd/?limit=25#277b

-- Steven Shiau <steven at nchc org tw> Wed, 08 Jun 2016 13:04:00 +0800

DRBL live 2.4.5-35

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2016/May/30).
  • Package drbl was updated to 2.20.11-drbl1, and clonezilla was updated to 3.21.13-drbl1.
  • Linux kernel was updated to 4.5.4-1.
  • Bug fixed: Use iproute2 to get MAC address and IP address info in ocs-chnthn-functions. Thanks to Richard Stanway for the patch. https://github.com/stevenshiau/clonezilla/pull/22

-- Steven Shiau <steven at nchc org tw> Mon, 30 May 2016 10:02:00 +0800

DRBL live 2.4.5-22

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2016/Apr/04).
  • Package drbl was updated to 2.19.16-drbl1.

-- Steven Shiau <steven at nchc org tw> Wed, 06 Apr 2016 10:29:00 +0800

DRBL live 2.4.5-21

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2016/Mar/31).
  • Package drbl was updated to 2.19.15-drbl1, and clonezilla was updated to 3.20.33-drbl1.
  • Bug fixed: Use "toram" instead of "toram=filesystem.squashfs" for the "To RAM" boot menu otherwise when ocs-srv-live is started, no vmlinuz and initrd could be found in drbl live. Thanks to hirokofan for reporting this issue.

-- Steven Shiau <steven at nchc org tw> Thu, 31 Mar 2016 11:20:00 +0800

DRBL live 2.4.5-19

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2016/Mar/21).
  • Linux kernel was updated to 4.4.6-1.
  • Package drbl was updated to 2.19.14-drbl1, and clonezilla was updated to 3.20.32-drbl1.

-- Steven Shiau <steven at nchc org tw> Tue, 21 Mar 2016 09:33:00 +0800

DRBL live 2.4.5-18

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2016/Mar/11).
  • Linux kernel was updated to 4.4.4-1.
  • Package drbl was updated to 2.19.12-drbl1, and clonezilla was updated to 3.20.27-drbl1.

-- Steven Shiau <steven at nchc org tw> Fri, 11 Mar 2016 23:12:00 +0800

DRBL live 2.4.5-6

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2016/Jan/05).
  • Linux kernel was updated to 4.3.3-5.
  • Package drbl was updated to 2.18.10-drbl1, and clonezilla was updated to 3.19.8-drbl1.

-- Steven Shiau <steven at nchc org tw> Thu, 06 Dec 2015 11:07:00 +0800

DRBL live 2.4.5-3

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2015/Dec/03).
  • Linux kernel was updated to 4.2.6-1.
  • Package drbl was updated to 2.18.4-drbl1, and clonezilla was updated to 3.19.2-drbl1.
  • Now by default Clonezilla will check image integrity before restoring. Option "-sc0" can be used to skip image checking on server, while "-scr" can used to skip image checking on client.

-- Steven Shiau <steven at nchc org tw> Fri, 04 Dec 2015 17:28:00 +0800

DRBL live 2.4.3-24

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2015/Oct/30).
  • Linux kernel was updated to 4.2.5-1.
  • Package drbl was updated to 2.17.7-drbl1, and clonezilla was updated to 3.18.8-drbl1.
  • Adding boot parameter "stick-to-pxe-srv" for DRBL live clients. This mechanism is used to stick to the PXE server when live-boot trying to lease IP address by using the boot parameter "stick-to-pxe-srv". It will drop the DHCP server without providing filename, so it can partially solve the issue that 2 DHCP servers co-exist on the same LAN. By default the max lease loop number is 10 times. The boot parameter "ethdev-dhcp-max-loop" can be used to assign the max number.

-- Steven Shiau <steven at nchc org tw> Fri, 30 Oct 2015 16:53:00 +0800

DRBL live 2.4.3-20

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2015/Sep/30).
  • Linux kernel was updated to 4.2.1-2.
  • Package drbl was updated to 2.17.3-drbl1, and clonezilla was updated to 3.18.3-drbl1.
  • Bug fixed: when multiple disks contain grub root partition, ocs-install-grub detected the root partition outside the restored ones.

-- Steven Shiau <steven at nchc org tw> Thu, 01 Oct 2015 23:08:00 +0800

DRBL live 2.4.3-18

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2015/Sep/23).
  • Package drbl was updated to 2.17.2-drbl1, and clonezilla was updated to 3.18.1-drbl1.
  • No more patching grub2 for uEFI netboot. We have used the preconfig of grub2 to honor the netboot config file grub-efi-01-${MAC//:/-} file first (e.g. /tftpboot/nbi_img/grub-efi.cfg/grub.cfg-01-00-0c-29-e9-c3-9d).
  • The local-disk boot menu was added for uEFI netboot menu. It covers most of the OSes.
  • Updated Forcevideo-drbl-live to work with the latest Sid. Thanks to Eric Reischer (emr at hev psu edu) for reporting this issue.
  • Bug fixed: dcs -> local did not switch that for local-disk in grub uEFI netboot mode.

-- Steven Shiau <steven at nchc org tw> Wed, 23 Sep 2015 19:35:00 +0800

DRBL live 2.4.3-8

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2015/Sep/17).
  • Linux kernel was updated to 4.1.6-1.
  • Package drbl was updated to 2.16.5-drbl1, and clonezilla was updated to 3.17.6-drbl1.
  • Partclone was updated to 0.2.83-drbl1. An xfs issue was fixed.
  • Switched to use live system for DRBL and Clonezilla client due to the missing /tmp or /dev/ issue (http://lists.freedesktop.org/archives/ systemd-devel/2015-September/034175.html).
  • Patch modified from Thomas Tsai to be applied to grub2 so that it can autoload grub2's config file when netbooting for uEFI clients (https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=793760).

-- Steven Shiau <steven at nchc org tw> Thu, 17 Sep 2015 14:50:00 +0800

DRBL live 2.4.2-23

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2015/Aug/07).
  • Package drbl was updated to 2.15.16-drbl1, and clonezilla was updated to 3.16.26-drbl1.
  • Linux kernel was updated to 4.1.3-1.
  • Partclone was updated to 0.2.81-drbl2. Now it supports VMFS partition >= 256 GB. A TUI crash issue for vmfs was fixed. Updated xfs and e2fs libs were used.
  • Enabled vmfs3 and vmfs5 support since partclone has solved the issue.
  • Program sfdisk (>=2.26) is used as the default program to create GPT partition.
  • The "Unable to find target partition" issue in GPT disk has been fixed.

-- Steven Shiau <steven at nchc org tw> Fri, 07 Aug 2015 09:23:00 +0800

DRBL live 2.4.2-15

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2015/Jul/23).
  • Package drbl was updated to 2.15.15-drbl1, and clonezilla was updated to 3.16.22-drbl1.
  • Linux kernel was updated to 4.0.8-1.
  • Partclone was updated to 0.2.81. A TUI crash issue for vmfs was fixed.
  • When restoring the image of a GPT disk, if the file "sda-pt.sf" for example is dumped by sfdisk >= 2.26, use sfdisk to create partition table in higher priority than sgdisk.
  • When /home/partimag is a mount point, prep-ocsroot should use "skip" as the default item. Thanks to Bruce Solomon [rufovillosum at yahoo com].
  • Bug fixed: option "-k1" failed due to ocs-expand-mbr-pt failed to read the output of sfdisk >= 2.26.
  • Bug fixed: the output file of update-efi-nvram-boot-entry failed to assign the correct variables.
  • Bug fixed: efibootmgr >= 0.12 has newer output format. Thanks to johnv-valve for reporting this (https://github.com/stevenshiau/clonezilla/issues/9).

-- Steven Shiau <steven at nchc org tw> Fri, 24 Jul 2015 16:45:00 +0800

DRBL live 2.4.2-10

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2015/Jun/19).
  • Package drbl was updated to 2.15.15-drbl1, and clonezilla was updated to 3.16.13-drbl1.
  • Linux kernel was updated to 4.0.2-1. The default union file system has been changed to overlay, therefore if you edit boot parameter manually, you have to use "union=overlay". No more using "union=aufs".
  • Switched to use systemd instead of sysvinit. Following the way in upstream.
  • Switched to use live-build/live-boot/live-config v4. All the boot parameters should remain the same. However, the boot parameter "components" introduced in live-boot v4 has to be added if you edit the boot parameters manually.
  • Partclone was updated to 0.2.78.drbl1. A btrfs issue has been fixed, and an issue about imaging a partition >=16 TB was fixed. Thanks to Abdullayev Natiq (natiq2004 at yahoo com) for helping to solve it.
  • Syslinux was updated to 6.03+dfsg-7.
  • Language files en_US, ca_ES, de_DE, es_ES, fr_FR, it_IT, ja_JP, and sk_SK were updated. Thanks to RenÃf© MÃf©rou, Michael Vinzenz, Juan RamÃf³n MartÃf­nez, JeanFrancois Nifenecker, Gianfranco Gentili, Akira YOSHIYAMA, and Ondrej Dzivy Balucha.
  • Language files for Hungarian were added. Thanks to Greg Marki (info.mlc at freemail hu) for providing the files.
  • Program util-linux was updated to 2.26.2-6. Due to the option "-R" is removed from "sfdisk", we now switch to use "blockdev --rereadpt". Thanks to Ismael (razzziel at users sf net) for reporting this.
  • DRBL live iso file is ready for uEFI booting for using dd command to put on USB flash drive.

-- Steven Shiau <steven at nchc org tw> Fri, 19 Jun 2015 21:51:00 +0800

DRBL live 2.3.2-3

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2015/Jan/13).
  • Package drbl was updated to 2.12.10-drbl1, and clonezilla was updated to 3.13.9-drbl1.
  • Live-boot was updated to 3.0.1-1.drbl7, and live-config was updated to 3.0.23-1.drbl13.
  • Partclone was updated to 0.2.75.drbl1.

-- Steven Shiau <steven at nchc org tw> Wed, 14 Jan 2015 16:29:00 +0800

DRBL live 2.3.1-9

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2014/Dec/11).
  • Linux kernel was updated to 3.16.7-ckt2-1.
  • Package drbl was updated to 2.11.5-drbl2, and clonezilla was updated to 3.12.9-drbl1.

-- Steven Shiau <steven at nchc org tw> Sat, 13 Dec 2014 15:28:00 +0800

DRBL live 2.3.1-6

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2014/Nov/13).
  • Linux kernel was updated to 3.16.7-2.
  • Linux kernel i486 was replaced by i586 because now only i586 kernel exists on Debian Sid repository.
  • Package drbl was updated to 2.11.4-drbl1, and clonezilla was updated to 3.12.6-drbl1.

-- Steven Shiau <steven at nchc org tw> Sat, 15 Nov 2014 15:31:00 +0800

DRBL live 2.3.0-1

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2014/Sep/29).
  • Package drbl was updated to 2.10.3-drbl1, and clonezilla was updated to 3.11.5-drbl1.
  • Updating drbl-live-hadoop to version 0.3 from Thomas Tsai.

-- Steven Shiau <steven at nchc org tw> Tue, 30 Sep 2014 15:43:00 +0800

DRBL live 2.2.4-6

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2014/Sep/15).
  • Linux kernel was updated to 3.16.2-3.
  • Package partclone was updated to 0.2.73.drbl1 with new support for f2fs and updated exfat lib.
  • Package drbl was updated to 2.10.1-drbl1, and clonezilla was updated to 3.10.33-drbl1
  • Package f2fs-tools, iw, davfs2, fstransform and rfkill were added.</li>
  • Syslinux was updated to 6.03-pre20.
  • Language files of Turkish were added. Thanks to Ömer YILDIZ <oyildiz at teknoplan com tr>.</li>

-- Steven Shiau <steven at nchc org tw> Thu, 18 Sep 2014 08:13:00 +0800

DRBL live 2.2.4-4

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2014/Aug/26).
  • Linux kernel was updated to 3.14.15-2.
  • Package drbl was updated to 2.9.19-drbl1, and clonezilla was updated to 3.10.30-drbl1.
  • Syslinux was updated to 6.03-pre19.

-- Steven Shiau <steven at nchc org tw> Thu, 28 Aug 2014 16:09:00 +0800

DRBL live 2.2.3-8

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2014/Jul/18).
  • Linux kernel was updated to 3.14.12-1.
  • Package drbl was updated to 2.9.10-drbl1, and clonezilla was updated to 3.10.26-drbl1.
  • Package partclone was updated to 0.2.72.drbl1 with newer xfs library.
  • Syslinux was updated to 6.03-pre18.

-- Steven Shiau <steven at nchc org tw> Fri, 18 Jul 2014 17:32:00 +0800

DRBL live 2.2.3-4

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2014/May/27).
  • Package drbl was updated to 2.9.2-drbl1, and clonezilla was updated to 3.10.14-drbl1.
  • Packages qemu-kvm and qemu-utils were added.
  • A testing program "ocs-img-2-vdk" was added. It can be used to convert Clonezilla image as virtual disk file (qcow2 and vmdk) via KVM. To use it, qemu-utils and qemu-kvm packages are required.
  • A program "drbl-live-hadoop" was added. This is still in testing.

-- Steven Shiau <steven at nchc org tw> Wed, 28 May 2014 14:04:00 +0800

DRBL live 2.2.3-2

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2014/May/22).
  • Linux kernel was updated to 3.14.4-1.
  • Package drbl was updated to 2.9.1-drbl1, and clonezilla was updated to 3.10.11-drbl1.
  • Package diskscan was added.
  • Accepting -b|-batch|--batch options for ocs-restore-mdisks. A typo in the USAGE message was fixed.

-- Steven Shiau <steven at nchc org tw> Thu, 22 May 2014 16:59:00 +0800

DRBL live 2.2.2-19

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2014/Apr/26).
  • Linux kernel was updated to 3.13.10-1.
  • Package drbl was updated to 2.8.19-drbl1, and clonezilla was updated to 3.10.4-drbl1.
  • Package live-config was updated to 3.0.23-1.drbl8.

-- Steven Shiau <steven at nchc org tw> Sat, 26 Apr 2014 16:08:00 +0800

DRBL live 2.2.2-16

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2014/Apr/05).
  • Linux kernel was updated to 3.13.7-1.
  • Package drbl was updated to 2.8.8-drbl1, and clonezilla was updated to 3.10.1-drbl1.
  • Package live-config was updated to 3.0.23-1.drbl6. A issue about "utc=no" was fixed.
  • Grub was updated to 2.02~beta2-8.

-- Steven Shiau <steven at nchc org tw> Sat, 12 Apr 2014 16:19:00 +0800

DRBL live 2.2.2-12

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2014/Mar/16).
  • Linux kernel was updated to 3.13.5-1.
  • Syslinux was updated to 6.03-pre9.
  • Package drbl was updated to 2.7.35-drbl1, and clonezilla was updated to 3.9.42-drbl1.
  • A graphic mode "KMS" was added in the boot menu.

-- Steven Shiau <steven at nchc org tw> Sun, 16 Mar 2014 19:21:00 +0800

DRBL live 2.2.2-3

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2014/Feb/11).
  • Linux kernel was updated to 3.12.9-1.
  • Package drbl was updated to 2.7.24-drbl1, and clonezilla was updated to 3.9.22-drbl1.
  • Program parted instead of fdisk is used in makeboot.sh to show the destination disk partition layout. Thanks to Ady (ady-sf at hotmail com) for this suggestion.

-- Steven Shiau <steven at nchc org tw> Wed, 12 Feb 2014 11:06:00 +0800

DRBL live 2.2.2-1

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2014/Jan/22).
  • Linux kernel was updated to 3.12.8-1.
  • Package drbl was updated to 2.7.21-drbl1, and clonezilla was updated to 3.9.18-drbl1.
  • Partclone was updated to 0.2.70. An issue about restoring an image file to a raw format has been fixed.
  • The "syslinux" and "isolinux" directories of Clonezilla live have been unified as one directory, "syslinux".
  • An option "-d syslinux" was added when running syslinux in makeboot.sh/makeboot.bat/makeboot64.bat. Thanks to Ady (ady-sf at hotmail com) for this suggestion.
  • The option "--rsyncable" was added for gzip/pigz when saving an image.
  • A directory "/utils/win64" was added to be used to run syslinux in a Win64 environment.
  • Language file zh_CN was updated. Thanks to Zhiqiang Zhang.
  • Language file ca_ES was updated. Thanks to René Mérou.
  • Bug fixed: the grub dir name is called "grub2" for Fedora >=18, that causes check_grub_partition function failed to locate the grub partition.

-- Steven Shiau <steven at nchc org tw> Thu, 23 Jan 2014 16:22:00 +0800

DRBL live 2.2.1-7

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2014/Jan/14).
  • Linux kernel was updated to 3.12.6-2.
  • Package drbl was updated to 2.7.19-drbl1, and clonezilla was updated to 3.9.10-drbl1.
  • Partclone was updated to 0.2.69.drbl1. Bugs about reiser4 and btrfs have been fixed.
  • Syslinux was updated to 6.03-pre1. This should fix a boot issue on some BIOS machine, e.g. Acer Aspire One.
  • Packages bcache-tools and chntpw were added.
  • Package pixz was added, and is used for parallel xz compression/decompression.
  • A mechanism to convert image compression format was added. It can be used to convert the gz compression to xz compression, for example.
  • Language files, it_IT, fr_FR, de_DE, andja_JP.UTF-8 were updated. Thanks to Gianfranco Gentili, Jean-Francois Nifenecker, Michael Vinzenz, and Akira YOSHIYAMA.

-- Steven Shiau <steven at nchc org tw> Wed, 15 Jan 2014 15:56:00 +0800

DRBL live 2.2.0-22

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2013/Nov/12).
  • Linux kernel was updated to 3.11.6-2.
  • Package drbl was updated to 2.6.9-drbl1, and clonezilla was updated to 3.8.8-drbl1.

-- Steven Shiau <steven at nchc org tw> Wed, 13 Nov 2013 20:33:00 +0800

DRBL live 2.2.0-17

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2013/Oct/22).
  • Linux kernel was updated to 3.11.5-1.
  • Package drbl was updated to 2.5.13-drbl1, and clonezilla was updated to 3.7.16-drbl1.

-- Steven Shiau <steven at nchc org tw> Wed, 23 Oct 2013 21:28:00 +0800

DRBL live 2.2.0-16

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2013/Oct/16).
  • Package drbl was updated to 2.5.13-drbl1, and clonezilla was updated to 3.7.15-drbl1.
  • Improvement: adding slash in the sshfs command to avoid a remote issue. Thanks to Baird Ramsey and Richard Freeman (https://sourceforge.net/p/clonezilla/bugs/171/).
  • Bug fixed: some services were not disabled successfully when live system was created.

-- Steven Shiau <steven at nchc org tw> Thu, 17 Oct 2013 14:56:00 +0800

DRBL live 2.2.0-8

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2013/Oct/08).
  • Package drbl was updated to 2.5.9-drbl1, and clonezilla was updated to 3.7.6-drbl1.
  • Bug fixed: In some cases the network card modules were not loaded in initramfs so that the DRBL clients failed to boot via PXE.

-- Steven Shiau <steven at nchc org tw> Wed, 09 Oct 2013 22:52:00 +0800

DRBL live 2.2.0-3

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2013/Oct/03).
  • Package drbl was updated to 2.5.4-drbl1, and clonezilla was updated to 3.7.3-drbl1.
  • This release was built with live-build 3, so the live-boot was updated to 3.0.1-1.drbl3, and live-config was updated to 3.0.23-1.drbl2. Due to this change, the live media mounting point after system booting now is /lib/live/mount/medium instead of the previous /live/image.

-- Steven Shiau <steven at nchc org tw> Thu, 03 Oct 2013 10:58:00 +0800

DRBL live 2.1.2-26

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2013/Sep/26).
  • Linux kernel was updated to 3.10.11-1.
  • Package drbl was updated to 2.5.3-drbl1, and clonezilla was updated to 3.6.20-drbl1.

-- Steven Shiau <steven at nchc org tw> Thu, 26 Sep 2013 21:45:00 +0800

DRBL live 2.1.2-23

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2013/Sep/09).
  • Package drbl was updated to 2.4.37-drbl1, and clonezilla was updated to 3.5.34-drbl1.
  • Package partclone-utils was updated to 0.2.1-drbl1.
  • Package tcplay was updated to 1.1-1.

-- Steven Shiau <steven at nchc org tw> Tue, 10 Sep 2013 20:46:00 +0800

DRBL live 2.1.2-11

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2013/Aug/26).
  • DRBL was updated to 2.4.31-drbl1, and Clonezilla was updated to 3.5.22-drbl1.

-- Steven Shiau <steven at nchc org tw> Wed, 28 Aug 2013 22:34:00 +0800

DRBL live 2.1.2-7

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2013/Aug/20).
  • Linux kernel was updated to 3.10.7-1.
  • Clonezilla was updated to 3.5.18-drbl1.
  • Skipping xfce4 panel question when 1st login.
  • Bug fixed: the mode in $live_auto_login_id_home/Desktop/Display.desktop for DRBL live should be 755.

-- Steven Shiau <steven at nchc org tw> Wed, 21 Aug 2013 22:30:00 +0800

DRBL live 2.1.2-2

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2013/Aug/17).
  • DRBL was updated to 2.4.28-drbl, and Clonezilla was updated to 3.5.16-drbl1.
  • Bug fixed: Linux kernel and initrd for PXE clients were missing in AMD64 version.

-- Steven Shiau <steven at nchc org tw> Sat, 17 Aug 2013 13:53:00 +0800

DRBL live 2.1.2-1

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2013/Aug/12).
  • DRBL was updated to 2.4.27-drbl, and Clonezilla was updated to 3.5.14-drbl1.
  • Linux kernel was updated to 3.10.5-1.
  • Package partclone was updated to 0.2.66.
  • Package syslinux was updated to 5.10.

-- Steven Shiau <steven at nchc org tw> Mon, 12 Aug 2013 17:00:00 +0800

DRBL live 2.1.1-5

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2013/May/15).
  • DRBL was updated to 2.4.10-drbl1, and Clonezilla was updated to 3.3.45-drbl1.
  • Linux kernel was updated to 3.8.12-1.
  • Package partclone was updated to 0.2.60.
  • Package GParted was updated to 0.16.1.
  • Package syslinux was updated to 5.01.

-- Steven Shiau <steven at nchc org tw> Wed, 15 May 2013 18:59:00 +0800

DRBL live 2.1.0-17

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2013/Mar/20).
  • DRBL was updated to 2.3.17-drbl1, and Clonezilla was updated to 3.3.18-drbl1.
  • Package partclone was updated to 0.2.59.
  • GParted was updated to 0.15.1.
  • Bug fixed: ocs-onthefly failed to use with optioin "-k1" (http://sourceforge.net/projects/clonezilla/forums/forum/663168/topic/6933289). Thanks to Sebastien for reporting this issue.
  • Bug fixed: Program ocs-tux-postprocess should search LV, too.

-- Steven Shiau <steven at nchc org tw> Thu, 21 Mar 2013 21:58:00 +0800

DRBL live 2.1.0-12

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2013/Mar/02).
  • DRBL was updated to 2.3.12-drbl1, and Clonezilla was updated to 3.3.11-drbl2.
  • Package partclone was updated to 0.2.58.
  • GParted was updated to 0.14.1.
  • Linux kernel was updated to 3.2.39-1.
  • Multipath devices, e.g. /dev/cciss/c0d0, are now supported natively. No more linking them to /dev/sd[a-z]. Therefore now LVM on cciss device are supported. Thanks to the patch files from Miracle Linux.
  • Xen disk (/dev/xvd[a-z]) was added as a supported device.
  • Language file ca_ES, de_DE, es_ES, it_IT, fr_FR, ja_JP.UTF-8, zh_CN and zh_TW were updated. Thanks to René Mérou, Michael Vinzenz, Alex Ibáñez López, Gianfranco Gentili, Jean-Francois Nifenecker, Akira YOSHIYAMA, and Zhiqiang Zhang.

-- Steven Shiau <steven at nchc org tw> Sun, 03 Mar 2013 13:43:00 +0800

DRBL live 2.1.0-9

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2013/Feb/14).
  • DRBL was updated to 2.3.5-drbl1, and Clonezilla was updated to 3.3.5-drbl1.

-- Steven Shiau <steven at nchc org tw> Thu, 14 Feb 2013 11:37:00 +0800

DRBL live 2.0.2-6

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2012/Dec/23).
  • Linux kernel was updated to 3.2.35-2.
  • DRBL was updated to 2.1.48-drbl1, and Clonezilla was updated to 3.1.36-drbl1.
  • Booting on EFI machine is ready in this release.

-- Steven Shiau <steven at nchc org tw> Sun, 23 Dec 2012 16:53:00 +0800

DRBL live 2.0.2-5

  • This is a bug fixed release.
  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2012/Dec/06).
  • DRBL was updated to 2.1.46-drbl1, and Clonezilla was updated to 3.1.28-drbl1.
  • Partclone was updated to 0.2.56.
  • Linux kernel was updated to 3.2.32-1.

-- Steven Shiau <steven at nchc org tw> Fri, 07 Dec 2012 11:15:00 +0800

DRBL live 2.0.1-8

  • This is a bug fixed release.
  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2012/Oct/06).
  • DRBL was updated to 2.1.6-drbl1, and Clonezilla was updated to 3.1.11-drbl1.
  • Partclone was updated to 0.2.54.

-- Steven Shiau <steven at nchc org tw> Sat, 06 Oct 2012 11:27:00 +0800

DRBL live 2.0.1-4

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2012/Sep/10).
  • DRBL was updated to 2.1.3-drbl1, and Clonezilla was updated to 3.1.5-drbl1.
  • Using drbl-run-parts instead of run-parts. This will be more straightforward.
  • A reserved image name "autoproductname" was added so that Clonezilla can use that to save and restore image based on the manufacture and product name got from dmidecode.

-- Steven Shiau <steven at nchc org tw> Mon, 10 Sep 2012 22:30:00 +0800

DRBL live 2.0.1-2

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2012/Aug/26).
  • DRBL was updated to 2.1.1-drbl1, and Clonezilla was updated to 3.1.1-drbl1.
  • Some minor bugs were fixed.

-- Steven Shiau <steven at nchc org tw> Sun, 26 Aug 2012 13:32:00 +0800

DRBL live 2.0.0-1

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2012/Aug/13).
  • DRBL was updated to 2.0.3-drbl1, and Clonezilla was updated to 3.0.4-drbl1. The related files are no longer in /opt/drbl; instead, they are now in /usr/sbin, /usr/bin, and /usr/share/drbl/. The config files are now in /etc/drbl/
  • Partclone was updated to 0.2.51.drbl1.
  • Linux kernel was updated to 3.2.23-1.

-- Steven Shiau <steven at nchc org tw> Tue, 14 Aug 2012 08:27:00 +0800

DRBL live 1.0.9-2

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2012/Jul/02).
  • Linux kernel was updated to 3.2.21-1.
  • DRBL was updated to 1.12.16-1drbl.
  • Clonezilla was updated to 2.6.6-1drbl.
  • Boot parameters "ocs_lang" and "ocs_live_keymap" are deprecated. Now it's better to use "locales" and "keyboard-layouts" from live-config 2.x.

-- Steven Shiau <steven at nchc org tw> Mon, 02 Jul 2012 21:14:00 +0800

DRBL live 1.0.8-19

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2012/Jun/20).
  • Linux kernel was updated to 3.2.20-1.
  • DRBL was updated to 1.12.14-1drbl.
  • Clonezilla was updated to 2.5.42-1drbl.
  • Partclone was updated to 0.2.49.

-- Steven Shiau <steven at nchc org tw> Wed, 20 Jun 2012 18:38:00 +0800

DRBL live 1.0.8-11

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2012/Apr/08).
  • Linux kernel was updated to 3.2.14-1.
  • DRBL was updated to 1.11.12-1drbl.
  • Clonezilla was updated to 2.5.28-1drbl.
  • Partclone was updated to 0.2.46.

-- Steven Shiau <steven at nchc org tw> Sun, 08 Apr 2012 10:19:00 +0800

DRBL live 1.0.8-7

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2012/Mar/02).
  • Linux kernel was updated to 3.2.7-1.
  • DRBL was updated to 1.16.1-1drbl.
  • Clonezilla was updated to 2.5.19-1drbl.

-- Steven Shiau <steven at nchc org tw> Sat, 03 Mar 2012 16:51:00 +0800

DRBL live 1.0.8-6

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2012/Feb/27).
  • Linux kernel was updated to 3.2.6-1.
  • DRBL was updated to 1.14.1-1drbl.
  • Clonezilla was updated to 2.5.18-1drbl.

-- Steven Shiau <steven at nchc org tw> Tue, 28 Feb 2012 20:22:00 +0800

DRBL live 1.0.8-3

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2012/Feb/08).
  • Linux kernel was updated to 3.2.4-1.
  • DRBL was updated to 1.11.1-1drbl.
  • Clonezilla was updated to 2.5.11-1drbl.

-- Steven Shiau <steven at nchc org tw> Wed, 08 Feb 2012 16:57:00 +0800

DRBL live 1.0.7-13

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2012/Jan/11).
  • Linux kernel was updated to 3.1.8-2.
  • Live-boot was updated to 2.0.15-1.drbl11.

-- Steven Shiau <steven at nchc org tw> Thu, 12 Jan 2012 21:00:00 +0800

DRBL live 1.0.7-11

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2012/Jan/05).
  • Amd64 version was added.
  • Linux kernel was updated to 3.1.6-1.
  • Partclone was updated to 0.2.43.
  • DRBL was updated to 1.10.77-1drbl.
  • Clonezilla was updated to 2.4.32-1drbl.

-- Steven Shiau <steven at nchc org tw> Wed, 05 Jan 2012 11:35:00 +0800

DRBL live 1.0.7-7

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2011/Nov/27).
  • Partclone was updated to 0.2.38.
  • DRBL was updated to 1.10.67-1drbl.

-- Steven Shiau <steven at nchc org tw> Mon, 28 Nov 2011 15:13:00 +0800

DRBL live 1.0.7-6

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2011/Nov/23).
  • Linux kernel 3.1.1-1 is used in this release.
  • Partclone was updated to 0.2.36.
  • DRBL was updated to 1.10.66-1drbl.
  • Clonezilla was updated to 2.4.18-1drbl.
  • GParted was updated to 0.10.0-1.1drbl.

-- Steven Shiau <steven at nchc org tw> Wed, 23 Nov 2011 14:21:00 +0800

DRBL live 1.0.6-4

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2011/Aug/10).
  • Linux kernel 3.0.0-1 is used in this release.
  • German language files were added. Thanks to Michael Vinzenz <michael.vinzenz at scalaris com>.
  • Due to the mount 2.19.1-5 program issue (debian bug #634871), mount 2.17.2-9.1, fuse-utils 2.8.4-1.3, and ntfs-3g 1:2011.1.15AR.4-2 are used.
  • DRBL was updated to 1.10.24.
  • Clonezilla was updated to 2.3.58.
  • Partclone was updated to 0.2.24.

-- Steven Shiau <steven at nchc org tw> Wed, 10 Aug 2011 11:19:00 +0800

DRBL live 1.0.5-6

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2011/Apr/14).
  • Bug fixed: The "Stale NFS file handle" issue on DRBL clients was fixed. It's due to a bad aufs mounting parameter "noxino".
  • Linux kernel 2.6.38-3 is used in this release.
  • DRBL was updated to 1.9.17.
  • Clonezilla was updated to 2.3.17.
  • Partclone was updated to 0.2.22.

-- Steven Shiau <steven at nchc org tw> Thu, 14 Apr 2011 20:49:00 +0800

DRBL live 1.0.2-46

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2011/Jan/07).
  • Bug fixed: Failed to start daemon on DRBL live clients due to the start-stop-daemon was not restored.

-- Steven Shiau <steven at nchc org tw> Sun, 16 Jan 2011 22:07:00 +0800

DRBL live 1.0.2-43

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2011/Jan/07).
  • Package drbl is updated to 1.9.8-17, and clonezilla is updated to 2.3.7-60.

-- Steven Shiau <steven at nchc org tw> Fri, 07 Jan 2011 21:36:00 +0800

DRBL live 1.0.2-37

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2010/Sep/28).
  • Bug fixed: alias IP address does not work for dhcpd 4.

-- Steven Shiau <steven at nchc org tw> Fri, 01 Oct 2010 11:20:00 +0800

DRBL live 1.0.2-34

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2010/Sep/28).
  • Bug fixed: A bug about re-running "drblpush -i" when start Clonezilla SE.
  • GParted was updated to 0.6.3.
  • A new boot parameter "ocs_client_no_per_NIC" was added. It can be used to assign the DRBL clients' number.

-- Steven Shiau <steven at nchc org tw> Tue, 28 Sep 2010 10:23:00 +0800

DRBL live 1.0.2-32

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2010/Sep/24). Kernel 2.6.32-23 is used.
  • DRBL was upgraded to 1.9.7-17, Clonezilla was upgraded to 2.3.7-25, partclone was updated to 0.2.15, and GParted was updated to 0.6.2.

-- Steven Shiau <steven at nchc org tw> Fri, 24 Sep 2010 05:49:00 +0800

DRBL live 1.0.2-26

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2010/Jun/21). Kernel 2.6.32-15 is used.
  • DRBL was upgraded to 1.9.6-28, Clonezilla was upgraded to 2.3.6-34, partclone was updated to 0.2.11, and GParted was updated to 0.6.0.

-- Steven Shiau <steven at nchc org tw> Tue, 21 Jun 2010 18:45:00 +0800

DRBL live 1.0.2-1

  • The underlying GNU/Linux operating system was upgraded. This release is based on the Debian Sid repository (as of 2010/Jan/26). Kernel 2.6.32-5 is used.
  • DRBL was upgraded to 1.9.5-46, Clonezilla was upgraded to 2.3.4-58, and GParted was updated to 0.5.1.

-- Steven Shiau <steven at nchc org tw> Tue, 26 Jan 2010 17:45:00 +0800

DRBL live 1.0.1-3

  • Based on Debian lenny repository 2010/Jan/19. Kernel 2.6.30-backports.1-486_2.6.30-3 is used.
  • DRBL was upgraded to 1.9.5-42, Clonezilla was upgraded to 2.3.4-57.
  • Bug fixed: GParted was missing in DRBL live 1.0.1-2.

-- Steven Shiau <steven at nchc org tw> Tue, 19 Jan 2010 07:23:00 +0800

DRBL live 1.0.1-2

  • Based on Debian lenny repository 2009/Dec/31. Newer kernel 2.6.30-backports.1-486_2.6.30-3 is used.
  • DRBL was upgraded to 1.9.5-40, Clonezilla was upgraded to 2.3.4-54. Some bugs were fixed, including swap partition was not created in multicast mode.

-- Steven Shiau <steven at nchc org tw> Thu, 31 Dec 2009 17:05:00 +0800

DRBL live 1.0.0-9

  • Newer kernel 2.6.30-backports.1-486_2.6.30-3 is used.
  • The program makeboot.sh will be checked if run as root.
  • genisoimage instead of mkisofs is used in both create-gparted-live and create-drbl-live. Thanks Orgad Shaneh for this bug report.

-- Steven Shiau <steven at nchc org tw> Mon, 20 Jul 2009 10:34:00 +0800

DRBL live 1.0.0-8

  • Newer kernel 2.6.30-backports-1 is used.
  • Because there is an issue when restoring FAT file system by partclone, a workaround to avoid using partclone to save FAT filesystem was added.
  • Patches from https://sourceforge.net/tracker/?func=detail&atid=671653&aid=2818368&group_id=115473 were applied. Thanks to Orgad Shaneh.
  • makeboot.sh was improved to allow USB device /dev/ub[a-z]. Thanks to the patch from tv.debian at googlemail com.
  • Feature added: 1st-disk keyword will work for multicast clone. Ref: https://sourceforge.net/tracker/?func=detail&atid=671650&aid=2817447&group_id=115473
  • Language file zh_CN was updated. Thanks to Zhiqiang Zhang.
  • Language file ja_JP.UTF-8 was updated. Thanks to Akira YOSHIYAMA.
  • The variable name sanboot_img_dir was changed to be sanboot_img_dump_dir in drbl.conf. aoe_shelf_max and aoe_slot_max were changed to be 15 instead of 20. drbl-aoe-img-dump was changed correspondingly.
  • drbl-aoe-serv now supports an option "-d" to allow more images in one more directories.
  • Package smartmontools was added in DRBL/Clonezilla live.

-- Steven Shiau <steven at nchc org tw> Thu, 16 Jul 2009 11:39:00 +0800

DRBL live 1.0.0-7

  • Based on drbl 1.9.4-45 and Clonezilla 2.3.3-65.
  • Language files es_ES, fr_FR, and it_IT were updated. Thanks to Alex Ibáñez López , Jean-Francois Nifenecker and Gianfranco Gentili.

-- Steven Shiau <steven at nchc org tw> Fri, 03 Jul 2009 17:29:00 +0800

DRBL live 1.0.0-6

  • Based on drbl 1.9.4-44 and Clonezilla 2.3.3-65.
  • Language file is used when configuring X-windows settings.

-- Steven Shiau <steven at nchc org tw> Wed, 01 Jul 2009 11:43:00 +0800

DRBL live 1.0.0-5

  • Dir utils containing syslinux programs, makeboot.sh, and makeboot.bat were added DRBL live iso file.
  • A boot parameter "drbl_live_noconfx" was added so that we can skip configureing X.
  • The boinc-client serivce is turned off when creating drbl live.
  • The custom-ocs function was added in DRBL live, just ad Clonezilla live does. Thanks to Orgad Shaneh.
  • X config will only be run when X program exists in DRBL live. Thanks to Orgad Shaneh.
  • The files in drbl-live.d are almost the same with those existing files in ocs-live.d, i.e. we reuse the boot parameters of Clonezilla live. Thanks to Orgad Shaneh for this suggestion.

-- Steven Shiau <steven at nchc org tw> Sun, 28 Jun 2009 09:50:00 +0800

DRBL live 1.0.0-4

  • Package xnetcardconfig was added in drbl live packages list.
  • VOL_LIMIT_DEFAULT is set as 2000 in drbl live. Thanks to Ming-Kult Tsai for this idea.

-- Steven Shiau <steven at nchc org tw> Mon, 22 Jun 2009 09:35:00 +0800

DRBL live 1.0.0-3

  • Bug fixed: failed to save image by Clonezilla.

-- Steven Shiau <steven at nchc org tw> Thu, 18 Jun 2009 22:06:00 +0800

DRBL live 1.0.0-2

  • Packages acpi, laptop-detect, acpi-support and hotkey-setup were added. Thanks to Louie Chen for this idea.
  • drbl 1.9.4-38 and clonezilla 2.3.3-50 are used now.

-- Steven Shiau <steven at nchc org tw> Wed, 17 Jun 2009 18:39:00 +0800

DRBL live 1.0.0-1

  • More packages were added, e.g. vim, ttf-kochi-gothic, iceweasel-l10n-(es-es|fr|it|ja|zh-cn|zh-tw), arj, curlftpfs, myrescue, pmount, wpagui..."
  • drbl 1.9.4-37 and clonezilla 2.3.3-47 are used now.
  • Based on Debian lenny, but kernel 2.6.29-5 from backports.undebian.org is used.
  • Some bugs were fixed. E.g. The password of user was not working.

-- Steven Shiau <steven at nchc org tw> Tue, 16 Jun 2009 13:15:00 +0800

DRBL live 0.9.19-2

  • Language and keymap selection are done in rcS.d.

-- Steven Shiau <steven at nchc org tw> Mon, 15 Jun 2009 21:10:00 +0800

DRBL live 0.9.18-3

  • drbl 1.9.4-27 and clonezilla 2.3.3-24 are used now.
  • Based on Debian lenny, but kernel 2.6.29-4 from backports.undebian.org is used.

-- Steven Shiau <steven at nchc org tw> Mon, 19 May 2009 09:10:00 +0800

DRBL live 0.9.18-1

  • drbl 1.9.4-11 and clonezilla 2.3.3-14 are used now.
  • Based on Debian lenny, but kernel 2.6.29-3 from backports.undebian.org is used.

-- Steven Shiau <steven at nchc org tw> Mon, 27 Apr 2009 10:42:00 +0800

  • 0.9.17-2
    • drbl version 1.9.3-37 and Clonezilla version 2.3.2-69 are used.
  • 0.9.17-1
    • Some more locales files are kept now so it's easier to assign a locale environment. E.g. you can assign locale=es_ES as boot parameter for Spanish environment.
    • The parameter "nolock" is now appended in /etc/fstab for drbl clients, since unfs3 won't work without that.
  • 0.9.16-3
    • Based on stable Debian Lenny (repository on Feb/26/2009).
    • drbl version 1.9.3-30 and Clonezilla version 2.3.2-57 are used.
  • 0.9.16-2
    • Based on Debian Lenny repository on Feb/14/2009.
    • drbl version 1.9.3-28 and Clonezilla version 2.3.2-55 are used.
    • GParted 0.4.3 is used.
  • 0.9.16-1
    • Based on Debian Lenny repository on Jan/30/2009. Newer kernel 2.6.26-13 is used.
    • drbl version 1.9.3-24 and Clonezilla version 2.3.2-49 are used.
  • 0.9.15-6
    • Based on Debian Lenny repository on Nov/19/2008. Kernel is 2.6.26-11.
    • clonezilla 2.3.2-26, drbl 1.9.3-3 and udpcast 20081213-1drbl are used.
    • GParted 0.4.1 is used.
  • 0.9.15-2
    • Based on Debian Lenny repository on Oct/19/2008. Kernel is 2.6.26-8.
    • clonezilla 2.3.1-80 and drbl 1.9.1-45 are used.
    • GParted 0.3.9 is used.
  • 0.9.14-5
    • "boinc_cmd --set_network_mode always" was added in drbl-live-boinc, suggested by Jazz Wang.
  • 0.9.14-3
    • Force to clean MAC address record in the filesystem.squashfs.
  • 0.9.14-1
    • Based on Debian Lenny with kernel 2.6.26-1.
    • clonezilla 2.3.1-38 and drbl 1.9.1-10 are used.
  • 0.9.13-1
    • Based on Debian Lenny with kernel 2.6.25.
    • clonezilla 2.3.1-16 and drbl 1.9.0-45 are used.
    • GParted 0.3.8 is used.
  • 0.9.12-12
    • Newer kernel 2.6.24-etchnhalf.1-486 (2.6.24-6).
  • 0.9.12-11
    • Bug fixed: keymap and X config should not be run in drbl clients.
  • 0.9.12-8
    • keymap and X config were added in rcS.d in drbl live so that we can choose keymap and config X.
  • 0.9.12-4
    • Based on testing Debian (Lenny) since (1) it's stable enough for Clonezilla. (2) Newer kernel (2.6.24) (3) squashfs, aufs are ready in lenny.
    • Bug fixed: /tftpboot/node_root/bin/hostname was not real program, it was configured by lh_config_hostname.
  • 0.9.12-3
    • Bug fixed: drbl was not able to start.
  • 0.9.12-2
    • etch-proposed-updates was removed in /etc/apt/sources.list.
    • Based on DRBL 1.8.2-63, Clonezilla 2.2.4-54.
  • 0.9.12-1
    • New kernel from EtchAndAHalf is used: 2.6.24-etchnhalf.1-486
    • Based on DRBL 1.8.2-62, Clonezilla 2.2.4-53.
  • 0.9.11-6
    • Newer GParted 0.3.6 from gparted.sf.net.
    • Based on DRBL 1.8.2-61, Clonezilla 2.2.4-45.
  • 0.9.11-5
    • Only one VGA mode in boot menu.
  • 0.9.11-4
    • Created by live helper, was by live package.
    • Newer kernel 2.6.22-4 from backports is used.
    • Newer GParted 0.3.5 backported from Debian Lenny.
    • Based on DRBL 1.8.2-50, Clonezilla 2.2.4-25.